FloWise Air Over Water Filter System

You can use  the FloWise Air Over Water Filter System to remove the iron in your water causing water discoloration and reddish-brown stains on your building, home, sidewalk and driveway.

The Air Over Water Filter uses an air-injection oxidation process that doesn’t require chemical injectors or the need for air compressors, which means there’s little ongoing maintenance.

As part of your whole-house water treatment plan, this filter system protects water softeners, dishwashers, washing machines, and other water-circulating appliances from iron buildup. You’ll experience lower failure rates, less need for costly repairs and an increase in equipment’s lifespan.


System Features:

  • Built to last using durable, commercial-grade, corrosion-resistant components
  • Components are third-party certified to NSF/ANSI Standard 61, ensuring the product complies with strict manufacturing standards
  • Its valve is a full-automated electronic metered control valve that is 40% more water efficient than the competition with high-efficiency programming for maximum water conservation

Benefits:

  • Improves water quality
  • Reduces water discoloration and staining
  • Cost-effective and low-maintenance
  • Doesn’t require chemical injectors or air compressors
  • Protects your water-circulating appliances

How It Works:

  • Untreated water flows into the tank and through an airspace of injected air. This air mixes with water to oxidize ferrous (dissolved) iron and manganese.
  • The media inside the Air Over Water Filter enhances the oxidation process and acts as a filter media to trap and eliminate staining and eliminate ferric (non-dissolved) iron and manganese.
  • Clean water free of iron and manganese enters your home, eliminating staining and preserving your plumbing and appliances.
  • Air Over Water filter periodically backwashes the media and injects fresh air into the tank. This process keeps the media bed clean and exposes more of the media for use, making for more efficient operation and extended lifespan.

Operating Parameters

pH
Temperature
Pressure
Iron (Ferrous)
Manganese
Oil
Polyphosphates
6.8 - 8.5
Min. 40º F - Max 110º F
20 - 100 PSI
Less than 15.0 PPM
Less than 5.0 PPM
No oil present
No polyphosphates

NOTE: Proper equipment application is required for product(s) to perform as specified. Not to be used to treat water that is microbiologically unsafe or of unknown quality, without an adequate and separate means of disinfection.

System Specs

MODEL
AIR10
AIR12
AIR13
MEDIA TYPE
Greensand Plus / Katalox-Light
Greensand Plus / Katalox-Light
Greensand Plus / Katalox-Light
MAX SOLUBLE Fe/Mn (PPM)
7 / 10
10 / 15
12 / 20
FLOW RATE (GPM)
2.7 / 4.0
3.9 / 6.0
9.0 / 10.0
BACKWASH RATE (GPM)
6.5
9.0 / 10.0
10.0 / 12.0
TANK SIZE
10 x 54
12 x 52
13 x 54