All FloWise Products
FloWise is a manufacturer of submersible water pumps, effluent pumps, jet pumps, control boxes, control panels, and vertical lineshaft turbines. Our products are built with plastics and heavy-duty stainless steel approved by the FDA, NSF-61 and ANSI-372. These top-grade materials provide strength, durability, and reliability to give professional contractors like you peace of mind when installing water well pump systems with FloWise products.
You can browse all FloWise products below.
FloWise S-Series 4″ Submersible Pump
- Designed for residential and light commercial applications
- Delivers high efficiency and maximum water volume from up to 25′ of lift
- Discharge head made from 304 stainless steel with (2) stainless steel loopholes for safety rope
- A built-in check valve made from 304 stainless steel with a Buna N rubber o-ring and a stainless steel retaining ring
- Bowls are 304 stainless steel stamped and designed for maximum abrasion
- Glass-reinforced, FDA-approved, polycarbonate diffuser plates to allow maximum resistance to wear and abrasion
- Hex pump shaft, pump shell, suction screen, cable guard, and motor bracket are all made from 304 stainless steel
- Motor bracket is NEMA 4″ standard to accept your choice of submersible motor
- For peace of mind, these pumps are NSF/ANSI 372 approved
FloWise Pro-Series Control Box
- Heavy gauge steel enclosure rated for indoor and outdoor use, Nema 3R
- Contractor preferred voltage relay
- Resistor-equipped capacitors to protect against electrical shock
- Tested and reliable components
- Ample room for easy installation of after-market protection devices
- Two grounding lugs
- Seven wiring knockouts
- Agency listed
FloWise Pro-Series QD Control Box
- Heavy gauge steel enclosure rated for indoor and outdoor use, Nema 3R
- Contractor preferred voltage relay
- Resistor-equipped capacitors to protect against electrical shock
- Tested and reliable components
- Universal design allows for Quick Disconnect / reconnect of cover
- Ample room for easy installation of after-market protection devices
- Two grounding lugs
- Seven wiring knockouts
- Agency listed
FloWise Custom Control Panels
- For peace of mind, all control panels are factory-tested and preset prior to shipping
- Yaskawa variable frequency drives (VFD)
- Service entrance rated
- Built-in VFD DC-link choke
- Fused control power transformer
- Wall mount or floor mount NEMA 3R or 12
- Door-mounted keypad
- VFD real time clock
- Control terminals for customer wiring
- UL tested and approved for single phase and three phase AC input power
- 200 – 240v three phase: 3/4 – 175 HP
- 380 – 480v three phase: 1-1000 HP
- UL 508A certified panel shop in Canby, Oregon
- Call (800) 994-1657 for more info
FloWise FLS Self-Priming Centrifugal Lawn Sprinkler Pump
- Manufactured with close-grained cast iron. A large, high-capacity pump case and seal plate to provide years of trouble-free performance and quick and easy priming.
- Back pullout design allows easy servicing – no need to disconnect plumbing lines.
- 1½” NPT suction and 1½” NPT discharge, draining, and winterization with (2) ¼” ports.
- Carbon ceramic-lapped sealing surface and stainless steel components provides years of leakage protection.
- Industry-proven, 56J “C” face Century open drip-proof motor (formerly AO Smith). Rated for indoor and outdoor installation. Dual voltage: 115/230v single phase motors (1 HP – 1½ HP), 230v, (2 HP – 3 HP) motor.
- Noryl with stainless steel insert.
- Bolt-down style diffuser creates positive alignment with the center of the impeller. Made with glass filled with Lexan to provide strength and superior abrasion handling.
FloWise FW2100 End Suction Centrifugal Pump
- Covers flows up to 3,500 GPM.
- Industry leading efficiencies of up to 90% lowers operating costs and are fully compliant with new Department of Energy conservation standards.
- Heavy-duty, re-inforced volute design for maximum strength. Double volute design on larger models.
- Investment cast, precision balanced stainless steel impellers are standard, providing smoother operation and improved corrosion resistance.
- Back pull-out design and replaceable shaft sleeves and wear rings enable convenient and cost-effective maintenance / repair.
- Available with standard mechanical seal or packing options.
- Key product dimensions designed to allow “drop-in” replacement of many existing pump installations.
FloWise FJS Shallow Well Jet Pump
- Uses the industry-proven, UL-Listed AO Smith/Century Nema standard motor
- The thermally protected motor is rated for continuous operation without damage
- No need to disturb the piping system with a backside easy pump component access
- Square-D 30/50 pressure switch
- Internal diaphragm keeps water in the pump case, protecting mech seal from run-dry damage
- Large top port opening to pour water in for initial priming
- Multiple tapped ports, 1¼” suction and 1″ discharge, ¼” pressure gauge port, nozzle cleanout port and a drain and winterization port
- Glass-filled, corrosion-resistant noryl impeller with stainless steel insert designed for a long life
- The positively aligned diffuser includes a stainless steel wear ring that helps resist abrasion and wear in harsh applications
- Maximum operating temperature: 140°F
- Assembled and tested in the U.S.A.
FloWise FSW Shallow Well Jet Pump
- Manufactured with heavy-duty, close-grained, cast iron pump case and seal plate to provide years of trouble-free performance
- Multiple tapped ports, 1¼” suction and 1″ discharge, ¼” pressure gauge port, nozzle cleanout port and a drain and winterization port
- Matched jet nozzle and venturi designed for maximum performance and resistance to abrasion
- Carbon ceramic lapped sealing surface and stainless steel components provides years of protection against leakage
- Industry-proven Square-D switch, factory-intalled with a 30/50 pre-set pressure setting for quick installation
- Industry-proven Century motor (formerly AO Smith) includes a one piece threaded shaft, balanced rotor, insulated windings and dust-proof ventilated enclosure
- Average priming time (in minutes) at 15 feet: FSW05 – 2.3; FSW07 – 1.7; FSW10 – 1.3; FSW15 – 1.1
- Assembled and tested in the U.S.A.
FloWise Vertical Line Shaft & Submersible Turbine Pump
- Ranges in size from 5″ – 14″ with capacities up to 8,000 GPM and heads up to 2,500 feet
- Discharge heads are engineered with heavy-duty ASTM A536 ductile construction, setting depths up to 750 feet
- Thick-walled, glass-lined bowls for increased strength and durability
- Industry-leading hydraulic performance and efficiency
- Sturdy, rugged design for reliable operation and long service life
- Standard, lead-free bronze bearings with thermoplastic option available
- Each component is manufactured with impeccably high quality materials
FloWise Water Filtration Systems
- Numerous system options and configurations available
- Remove hardened minerals like calcium, iron, manganese, and chlorine that stain fixtures and batter appliances like washing machines, ice makers, dishwashers, and more
- Low-energy, water-saving technology that saves money and is environmentally friendly
- User-friendly LCD displays with “set it and forget it” controls at the valve that are 40% more water-efficient than comparable filtration systems
- Space-saving designs with fewer parts and less maintenance
- Built with heavy-duty components that meet the high standard of NSF / ANSI 61
MAILING ADDRESS
FloWise
P.O. Box 1815
Fort Worth, TX 76101